Advertisement
Disconnect the connector (37).
Undo the screws (38).
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Disconnect the connector (37).
Undo the screws (38).
Disconnect the ground cable (39), undoing the
nut (40).
Remove the indicated cable ties.
Disconnect and detach the ABS sensor
connector (41).
Disconnect the vehicle motion sensor connector
(42).
Undo the fastener nut on the clamp on the
parking brake cable (43).
Perform all the operations described previously
on both sides of the vehicle.
Advertisement
