Advertisement
Connect the battery (
Magnetorheological shock absorbers (optional) only.
Refit the wheels (
Check the vehicle set-up (
Replacing the shock absorber elements
Tightening torque
Fastening bushing and shock absorber retainer
washer
Fastening connector to shock absorber strut
The following procedure describes how to disassemble the front and rear shock absorbers, in order to
replace individual components if necessary.
Remove the front shock absorbers (
To replace a component of the front shock absorber.
Remove the rear shock absorbers (
To replace a component of the rear shock absorber.
Disassembling the single-damping shock absorber
F2.01).
D2.01).
D4.07).
D4.04).
D4.04).
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Tighten the screws indicated fastening the shock
absorber (A) to the chassis.
Tightening torque
Screw (pretightening)
Screw
Connect the connector (1).
Magnetorheological shock absorbers (optional)
only.
Nut
Nut
Nm
Class
20 Nm
110 Nm
Nm
Class
40 Nm
A
40 Nm
A
A
A
Advertisement
