Advertisement
Check the alignment of the exhaust system (
Refit the rear wheelhouses (
Refit the rear flat undertray diffuser (
B7.01).
E3.05).
E3.12).
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Never reuse exhaust system clamps and
gaskets that have been subjected to
operating temperature. Always replace
with new components.
Only new exhaust system clamps and
gaskets may be removed and refitted for
adjustment purposes during initial
installation.
Replace and fasten the spherical clamp (1),
tightening the indicated screw.
Tightening torque
Spherical clamp
Tighten the nuts indicated.
Tightening torque
Nut
On both sides of the vehicle, check that the
cosmetic tailpipes are aligned correctly with
the pipes on the silencers.
In case of misalignment, adjust the silencer via
the respective fasteners.
Nm
Class
35 Nm
B
Nm
Class
25 Nm
B
Advertisement
