Advertisement
Tightening torque
Fastening door window
Fastening lower fastener between power window
unit guides - door
Distance from quarterlight glass
With the door closed, press the power window button and check that the window rolls smoothly and stops
in the correct position.
Remove the door panel (
DO NOT disconnect the door panel connectors.
Screw
Nut
E3.08).
Check that the gap between the rear edge of the
Front Roof shell and the rear edge of the door
window is 65 ± 2 mm.
If the distance measured is within the range
specified, check intrusion as described as
follows.
If the distance is not within the range specified,
adjust as follows.
Remove both waterproof liner sheets (1).
Nm
Class
9.5 Nm
B
9.5 Nm
B
Advertisement
