Advertisement
ONLY for vehicles WITHOUT single oil heat
exchanger
Connect the clutch hydraulic oil system pipe
unions. Follow the instructions given below to
ensure proper connection:
ensure that the notch on the safety ring nut (14)
is aligned with the pin (13);
connect the male union and turn the safety ring
nut (14) so that it is no longer aligned with the
pin (13);
ALWAYS ensure that the pipe union is effectively
connected.
ONLY for vehicles WITHOUT single oil heat
exchanger
Connect the oil delivery and return unions (11)
for the hydraulic clutch system, following the
procedure described previously.
Fit the mounting bracket (6) for the hydraulic
clutch system oil pipes and, after ensuring
that the pads are fitted correctly, tighten the
screws (7) with relevant washers.
Tightening torque
Screw
Fit and fasten the retainer clamps and tie (8) to
the bodyshell as originally installed.
ONLY for vehicles WITHOUT single oil heat
exchanger
Using the photo aside as reference, check that
the EPB electric parking brake cables are
located correctly relevant to the hydraulic
clutch system oil pipe mounting bracket.
Nm
Class
20 Nm
B
Advertisement
