Advertisement
Connect the battery (
Replacing the internal door handle
Remove the door panel (
F2.01).
E3.08).
Fit the door panel (D) on the door, attaching the
upper part and pressing towards the door.
Tighten the thirteen screws indicated fastening
the door panel (D).
Tightening torque
Screw
Fit the air vent ring nut (C) in the relative seat
and turn clockwise.
Fit the loudspeaker grille (B) in the relative seat
and press until correctly fastened.
Fit the centre door panel trim (A) in the
respective seat and press until correctly
fastened.
Undo the two upper screws indicated fastening
the internal handle to the relative mounting
bracket (A).
Nm
Class
8 Nm
B
Advertisement
