Ferrari California Workshop Manual page 676

Clean the ball joint pin and the relative seat on
the arm (13) to remove any grease residue.
Fit the stub axle on the arms.
Apply the nut (12) fastening the lower arm (13) to
the stub axle, after installing the relative
washer, and pre-tighten.
Tightening torque
Nut (pretightening)
Loosen the nut (12) and then tighten.
Tightening torque
Nut
Clean the ball joint pin and the relative seat on
the arm to remove any grease residue.
Apply the nut (10) fastening the lower arm (11) to
the stub axle, after installing the relative
washer, and pre-tighten.
Tightening torque
Nut (pretightening)
Loosen the nut (10) and then tighten.
Tightening torque
Nut
Nm Class
90 Nm A
Nm Class
63 Nm A
Nm Class
52 Nm A
Nm Class
52 Nm A