Advertisement
ONLY for vehicles WITHOUT single oil heat
exchanger
To disconnect the gear oil pipes, turn the safety
ring nut (14) to align the notch on the ring nut
with the pin (13).
Push the safety ring (14) towards the pin (13) to
release the pipes.
ALWAYS dispose of liquids correctly in
accordance with applicable legislation.
Collect all liquids drained from the vehicle
systems in appropriate airtight containers,
then close the containers.
Allow the liquid remaining in the gear oil pipes to
drain completely.
ONLY for vehicles WITH single oil heat
exchanger
Remove the brackets (7) by undoing the
indicated screws.
Detach the pipes (6).
ONLY for vehicles WITH single oil heat
exchanger
Remove the bracket (8), undoing the indicated
screws.
Remove the upper bracket (9) from the bracket
(8), undoing the screw indicated by the red
arrow.
Place a container under the collars (11) for
collecting the coolant.
Pour the fluid drained from the system into a
container and seal it. DO NOT DISPOSE
OF USED FLUID IN THE
ENVIRONMENT.
Loosen the collars (11) and wait for all the
coolant contained in the pipes (10) to drain
completely.
Plug the pipes (10).
Advertisement
