Ferrari California Workshop Manual page 619

Hide thumbs Also See for California:

Depress the brake pedal fully to engage the pedal itself with the servo brake linkage.

Release the brake pedal and ensure that it is effectively attached to the linkage.

Adjust the brake pedal position (

Refit the dashboard (

Connect the battery (

Adjusting the brake pedal position

Tightening torque

Fastening brake pedal endstop

Fit the pedal board in the relative seat in the

passenger compartment and fasten by

tightening the six fasteners indicated (four

nuts fastening the pedal board to the servo

brake and two screws fastening the pedal

board to the firewall) in the sequence

indicated in the photo aside.

Tightening torque

Fit the brake pedal (B) in the relative seat on the

pedal board and fasten by fitting the pin (4).

Fasten the pin (4) by fitting the retainer clip (3).

Connect the connector (1) to the brake pedal

stop light switch (C).