Advertisement
Remove the active carbon filter, complete with bracket and filter for the OBD pump, from its seat, easing
out toward the rear of the vehicle.
Detach the pipe (9) connecting the filter to the
diagnostic pump, removing the clamp (18).
A double-lock safety clip is fitted on the pipe (14)
connecting the filter to the fuel vapour
separator (16).
To disconnect the "double-lock" quick-coupling,
using due caution and by pressing on both
sides, push the safety clip out of its seat until
you hear the "unclick".
The difference between the safety clip "clicked"
and "unclicked" position is only a few
millimetres.
Then press on both sides of the quick-coupling
and remove the pipe.
Working from the wheel bay, undo the screw (10)
fastening the active carbon filter mounting
bracket.
Advertisement
