Advertisement
Remove the silencer via the wheel bay.
Refitting the silencer
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Undo the nuts indicated.
Loosen the clamp (1) by undoing the indicated
screw.
Mark the position of the rear bracket (A) on the
silencer (B).
Support the weight of the silencer (B) adequately.
Undo the indicated nuts, retrieving the plate (3).
Mark the position of the front bracket (C) on the
silencer (B).
Support the weight of the silencer (B) adequately.
Undo the indicated nuts, retrieving the plate (3).
Disconnect the pipe (4).
Advertisement
