Advertisement
Never reuse exhaust system clamps and gaskets that have been subjected to operating temperature.
Always replace with new components.
Only new exhaust system clamps and gaskets may be removed and refitted for adjustment purposes
during initial installation.
Fit new Torx clamps on the front of the exhaust extensions and the front of the central silencer.
Working from under the vehicle, fit the centre silencer in the relative seat, fitting onto the catalytic
converters.
Fit the exhaust extension mounting bracket and
the respective spacer in the relative seat on
the chassis and fasten by tightening the two
screws (2) and the nut (10).
Tightening torque
Screw
Move the exhaust extensions (D) toward the
front of the vehicle, connecting to the exhaust
silencer and fitting the bushings (1) in the
relevant guides for the pins on the mounting
bracket.
Tighten the nuts indicated fastening the bushings
(1) to the mounting bracket.
Tightening torque
Nut
Ensure that the two welds indicated on the
centre silencer (C) are inserted correctly in
the seats on the exhaust extensions (D).
Nm
Class
25 Nm
B
Nm
Class
10 Nm
B
Advertisement
