Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Partially tighten then fully tighten all the indicated
screws fastening the front removable
subframe (69) in the following sequence.
The screws are not all the same length. Before
applying the screws, refer to the notes made
during removal to ascertain which screws
correspond to which positions.
Tightening torque
Screw
CAUTION
Check that all screws are correctly fastened before
removing the trolley supporting the removable
subframe.
Slowly lower the trolley lift platform
with the relative lowering handle.
Place a hydraulic jack fitted with the tool
(AS
107566) under the engine oil sump.
Tighten the centre screws indicated.
Tightening torque
Screw
Tighten the front screws indicated.
Tightening torque
Screw
Tighten the rear screws indicated.
Tightening torque
Screw
The front removable subframe (69) is now
completely fastened and the hydraulic jack
may be removed.
Nm
Class
60 Nm
B
(AS
107565)
Nm
Class
110 Nm
A
Nm
Class
110 Nm
A
Nm
Class
110 Nm
A
Advertisement
