Advertisement
The trolley
(AS
107565) is necessary for the
removal of the rear removable subframe
complete with gearbox.
The trolley consists of a turntable platform (53),
which can be locked in position with the two
handles (54); of six locator pins (52), with
relative swivelling and removable mounts; of
a pedal (55) for lifting the platform, and a
handle (56) for lowering the platform.
CAUTION
For safety reasons, position the support trolley for
the removable subframe with particular care.
Place the rear removable subframe support
trolley
(AS
107565) in position, with the
control handle facing backwards; lift the
platform so that the locator pins are
approximately 20 mm below the respective
holes in the chassis, as shown in the photo.
Lock the turntable platform with the relative
handles.
CAUTION
Always ensure that the pins of the support trolley
are inserted correctly in the respective holes on
the removable subframe.
Using a wrench, raise the locator pins (52) to
bring them into contact with the relative holes
on the rear removable subframe.
Advertisement
