Advertisement
ONLY for vehicles WITH Single Oil Heat
Exchanger FROM Assembly No. 103179
(consult the Spare Parts Catalogue to identify
vehicles not affected by modification)
Remove the bracket (7), undoing the indicated
screws.
Detach the pipes (6).
Place a container under the screw collars (11) for
collecting the coolant.
Pour the fluid drained from the system into a
container and seal it. DO NOT DISPOSE
OF USED FLUID IN THE
ENVIRONMENT.
Loosen the screw collars (11).
Disconnect the hose unions (10) from the pipes
(6) and wait for all the liquid contained in the
pipes to drain completely.
Plug the hose unions (10).
Undo the screws indicated.
Lift the front heat shields (65) and (66) out of the
way so that they do not hinder the
subsequent operations.
Loosen the two Torx clamps (4) fastening the
centre silencer (C) to the exhaust extensions
(D).
Advertisement
