Advertisement
Refit the wheels (
Check the vehicle set-up (
Removing the rear suspension lower arm
The replacement arm is supplied complete with Flanbloc.
The following procedure is for removing the right hand rear suspension lower arm.
The procedure for removing the left hand rear suspension lower arm is the same.
Remove the wheels (
Remove the rear flat undertray section (
Support the weight of the rear suspension adequately.
D2.01).
D4.07).
D2.01).
Remove the yellow reference markings made
during removal.
Using an indelible red marker pen or paint, make
reference markings on the stud bolts and
relative nuts and the eyebolts of the Flanblocs
fastening the lower arm.
E3.12).
Detach and remove the rubber plug (C) from the
front of the lower arm.
Advertisement
