Advertisement
Filling the system with Shell Transaxle 75W-90 GL5 gear oil (ONLY for vehicles WITHOUT single oil
heat exchanger)
Tightening torque
ATF and GL oil pipe mounting bracket
Gear oil drain/filler plug - GL differential
ONLY for vehicles WITHOUT single oil heat
exchanger
To disconnect the gear oil pipes, turn the safety
ring nut (14) to align the notch on the ring nut
with the pin (13).
Push the safety ring nut (14) towards the pin (13)
to release the pipes.
ALWAYS dispose of liquids correctly in
accordance with applicable legislation.
Collect all liquids drained from the vehicle
systems in appropriate airtight containers,
then close the containers.
Allow the liquid remaining in the gear oil pipes to
drain completely.
Screw
Plug
Clean the unions to be connected thoroughly
with a suitable degreaser that does not leave
residue.
Connect the gear oil pipe unions. Follow the
instructions given below to ensure proper
connection:
ensure that the notch on the safety ring nut (14)
is aligned with the pin (13);
connect the male union and turn the safety ring
nut (14) so that it is no longer aligned with the
pin (13);
ALWAYS ensure that the pipe union is effectively
connected.
Nm
Class
20 Nm
B
25 Nm
B
Advertisement
