Advertisement
B3.05
Fuel level sensor
Replacing the fuel level sensors
Tightening torque
Fastening the fuel level sensors
CAUTION
FUEL IS HIGHLY FLAMMABLE.
NEVER WORK ON A HOT ENGINE.
TO PREVENT FIRE RISKS AND FUEL LEAKAGE, WORK ONLY ON A COLD ENGINE WITH AN EMPTY
FUEL TANK.
CAUTION
Take every necessary precaution, since fuel residues may remain in the tank and in the pipes, even after the
operations described.
Whenever the fuel level sensor is removed, ALWAYS REPLACE WITH A NEW SENSOR, fitting a new
O-ring.
There are two sensors, located on the left and at the centre under the rear seats.
The following procedure is for removing the left hand fuel level sensor. The procedure for the central sensor
is the same.
Disconnect the battery (
Drain the fuel system (
Remove the rear seats (
For vehicles in "2+2 seat" configuration.
Remove the luggage bench (
For vehicles in "2 seat" configuration.
F2.01).
B3.07).
E4.01).
E4.01).
Screw
Prise out the cable grommet (1).
Prise out the plug (2).
Nm
Class
5 Nm
B
Advertisement
