Advertisement
Pick up the tyre and ensure that the direction of
rotation is correct.
Lubricate both beads.
Fit the inflation valve (A) at 6 o'clock.
Place the tyre on the rim and tip the tool arm (4)
forwards.
Fit the lower bead under the right hand part of
the tool (4).
Turn the wheel clockwise.
Mount the bead on the rim, applying constant
pressure.
Turn the wheel, bringing the inflation valve (A) to
12 o'clock.
The bead breaker disc must never reach the
valve-sensor assembly position.
Fit the inflation valve (A) at 4-5 o'clock.
Place the tyre on the rim, matching the lighter
parts of the rim, marked with an embossed
letter "G", with the yellow dots on the tyre.
Insert the lever (5) at 2-3 o'clock, using the bead
breaker disc (3) to push the bead in.
If available, use tyre pliers instead of the lever
(5), with the appropriate adapter fitted.
If necessary, insert a second set of tyre pliers,
with the correct adapter fitted.
Turn the wheel clockwise until the upper bead is
completely mounted.
If used, remove the tyre lever with the bead
breaker disc.
Advertisement
