Tighten the three nuts indicated fastening the
power window motor (C) to the door subframe.
Tightening torque
Nut
Connect the connector (3) to the power window
motor (C).
Attach the clip (2) to the door subframe.
Tighten the two upper screws indicated fastening
the rear guide (B) and the front guide (A).
Tightening torque
Screw
Tighten the two lower nuts indicated fastening
the rear guide (B) and the front guide (A).
Tightening torque
Nut
Fit and affix, pressing manually, a new strip of
protective foam (1) to the door subframe.
Nm
Class
9.5 Nm
B
Nm
Class
9.5 Nm
B
Nm
Class
9.5 Nm
B