Advertisement
FROM Assembly No. 103179 (consult the Spare Parts Catalogue to identify vehicles not affected by
modification)
Arrange the cables and pipes correctly to prevent them from being crushed.
Fit the inspection cover (A).
Tighten the indicated nuts and screw.
Tightening torque
Nut
Check the condition of the tank and the relative
components.
Check the state of the vibration damper pads
and replace if necessary.
Check that the lateral damper pads (10) are
coated with a layer of grease TUTELA MR3,
and apply new grease if necessary.
Fit the fuel tank (F), supporting its weight
adequately and taking care not to bend the
vibration damper pads.
Nm
Class
3.5 Nm
B
Advertisement
