Advertisement
Fit the rear bumper, pressing on both sides to fasten to the respective lateral mounting brackets fixed to
the bodyshell.
Fit the rear bumper, pressing on both sides to fasten to the respective lateral mounting brackets fixed to
the bodyshell.
On both sides, loosen the three nuts indicated
fastening the respective lateral mounting
brackets (C) for the rear bumper and adjust to
obtain the correct panel alignment.
On both sides, tighten the three nuts indicated
fastening the respective lateral mounting
brackets (C) for the rear bumper.
Tightening torque
Nut
If the rear bumper (A) has been replaced, check,
on both sides of the vehicle, that the holes on
the bumper fixing plate (D) are correctly
aligned with the holes on the tailpipes on the
silencers (E).
If the alignment between the cosmetic tailpipes
(D) and the pipes on the silencers (E) is
incorrect, adjust the silencers from the
respective fasteners.
On the right-hand side, tighten the lateral screw
(2) fastening the rear bumper (A).
Tightening torque
Screw
Nm
Class
4.5 Nm
B
Nm
Class
7 Nm
B
Advertisement
