Advertisement
After topping up the engine oil, the TFT display may continue to display the relative icon
Draining the engine lubrication system
Pour the oil drained from the system into a container and seal it. DO NOT dispose of used oil in the
environment.
Remove the central flat undertray section (
with the specific message "Check engine oil level" for a prolonged period of time. This
is completely normal.
Check that the engine oil level is between the
MIN and MAX limits indicated on the dipstick
(A).
The gap between the MIN and MAX limits
corresponds to approximately 1.5 litres of
oil.
If the level is too low, identify the cause of
excessive oil consumption before
proceeding.
Top up the engine oil using only new oil of
the type specified in the fluids and
lubricants table.
If the engine oil level is near or below the MIN
limit, top the system up to between the MIN
and MAX limits with new engine oil of the
specified type.
Fit and tighten the cap (B) securely.
E3.12).
Advertisement
