Advertisement
Refitting the cylinder head covers
Tightening torque
Fastening the cylinder head covers
Fastening ground cable onto cylinder head cover Screw
Fastening engine oil dipstick
Some of the following photos show the engine on the workbench to illustrate the operation more clearly.
Screw (pretightening)
Screw
Screw
Replace the cylinder head cover gasket (15).
Ensure that the new gasket (15) is seated
correctly on the cylinder head cover.
Replace the indicated gaskets.
Brush soapy water onto the indicated gasket to
facilitate installation on the solenoid valves.
Nm
Class
5 Nm
B
11 Nm
B
10 Nm
B
10 Nm
B
Advertisement
