Advertisement
Removing the rear wheelhouses
These consist of two elements: to remove the front element, the rear element must first be removed.
Remove the wheels (
D2.01).
Rear element
Fit the rear element (B) inserting the
underwindscreen shield water drain pipe into
the relative hole.
Fit it below the front element if it was removed
alone.
Fasten the rear element (B) with the six
fasteners (2): tighten three screws and insert
three plastic inserts.
Tightening torque
Screw
Front element
Fit the front element (A).
Fasten the front element (A) with the five
fasteners (1): tighten three screws and insert
two plastic inserts.
Tightening torque
Screw
Nm
Class
2.5 Nm
C
Nm
Class
2.5 Nm
C
Advertisement
