Advertisement
UP TO Assembly No. 103178 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Fit the clip (92) on the EPB linkage bracket as
originally installed.
UP TO Assembly No. 85744
Fit the emergency gearbox lock releaser cables,
leading towards the passenger compartment,
onto the retainer bracket (25), and fasten the
cables by fitting the Seeger rings (24).
Fit the Bowden cables (23) on the relevant
blocks.
Fasten the Bowden cables (23) by fitting the
retainer clips (22).
Fit the exhaust extension mounting bracket in the
relevant seat on the chassis and fasten by
tightening the two screws (2) and the nut (10).
Tightening torque
Screw
Move the exhaust extensions (D) toward the
front of the vehicle, connecting to the exhaust
silencer and fitting the bushings (1) in the
relevant guides for the pins on the mounting
bracket.
Tighten the nuts indicated fastening the bushings
(1) to the mounting bracket.
Tightening torque
Nut
Nm
Class
25 Nm
B
Nm
Class
10 Nm
B
Advertisement
