Advertisement
Refitting the active carbon filter
Tightening torque
Active carbon filter locking bracket - chassis
fastener bracket
Fastening active carbon filter mounting bracket to
chassis
Cover - carbon filter
Disconnect the remaining pipes (17) connected
to the carbon filter.
A "double-lock" safety clip is fitted on the lower
pipe connected to the active carbon filter.
To disconnect the "double-lock" quick connector,
using due caution and by pressing on both
sides, push the safety clip out of its seat until
you hear the "unclick".
The difference between the safety clip "clicked"
and "unclicked" position is only a few
millimetres.
Then press on both sides of the quick-coupling
and remove the lower pipe (17).
Undo the screw (11), release the retainer bracket
(12), detach the active carbon filter (A) and
replace.
Screw
Screw
Screw
Nm
Class
5 Nm
B
24 Nm
B
6 Nm
B
Advertisement
