Advertisement
Remove any residual sealant paste from the
mating surface with the cylinder head.
Apply CAF 4 in the positions indicated in the
photo aside.
Left-hand side
Take care not to damage or scratch the
cylinder head cover.
Fit the cylinder head cover (12) in its relative seat.
Fit the clamp( 14) complete with cable.
Apply and hand tighten all screws indicated.
Left-hand side
Pre-tighten the indicated screws in the sequence
given in the photo aside.
Tightening torque
Screw (pretightening)
Tighten the screws indicated in the sequence
given in the photo aside
Tightening torque
Screw
Nm
Class
5 Nm
B
Nm
Class
11 Nm
B
Advertisement
