Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
CAUTION
Check that all screws are correctly fastened before
removing the trolley supporting the removable
subframe.
Slowly lower the trolley lift platform
with the relative lowering handle.
Place a hydraulic jack fitted with the tool
(AS
107566) under the engine oil sump.
Partially tighten then fully tighten all the indicated
screws fastening the front removable
subframe (69) in the following sequence.
The screws are not all the same length. Before
applying the screws, refer to the notes made
during removal to ascertain which screws
correspond to which positions.
Tightening torque
Screw
FROM Assembly No. 85739 UP TO Assembly No.
103178 (consult the Spare Parts Catalogue to
identify vehicles not affected by modification)
Apply and tighten the two screws indicated
fastening the reinforcement tube (90) to the
front removable subframe (69).
Tightening torque
Screw
(AS
107565)
Nm
Class
60 Nm
B
Nm
Class
24 Nm
B
Advertisement
