Advertisement
Tightening torque
Water-oil pipes - gear oil heat exchanger
Remove the engine compartment cosmetic shields (
Remove the front wheelhouses (
Remove the rear right hand element.
Pipe union
E3.13).
E3.05).
01) Detach the bleed pipe (1), on the right-hand
The photo aside was taken with the secondary
02) Undo the union (2) on the delivery pipe (3)
50 Nm
side of the radiator, removing the indicated
clamp and keeping the pipe at the height of
the header tank union.
air pump removed to illustrate the procedure
more clearly.
leading to the heat exchanger, retrieving the
relative seals.
Nm
Class
A
Advertisement
