Advertisement
The definitive application of the film must be
carried out exclusively with the specific
spatula, using lateral movements (see
photo aside) to prevent stretching the film.
Then, as described above, working with due
caution and performing lateral movements
with the spatula, ensure that the film adheres
completely to the paintwork, pressing onto the
film with the necessary force to expel the
detergent without leaving any air bubbles,
adhering the film definitively onto the
Tonneau Cover.
If the film does not adhere correctly, rinse the
relative part of the film with water only, then
adhere again.
After application, check that there are no air
bubbles and leave the film for at least 1
hour to allow the adhesive to set.
Leave the adhesive to set for an hour, then wash
the Tonneau Cover with water only and dry
with a clean microfibre cloth.
Advertisement
