Advertisement
ONLY for vehicles WITHOUT single oil heat exchanger
Refit the rear flat undertray section (
ONLY for vehicles WITHOUT single oil heat
exchanger
Connect the delivery and return unions (11) and
fasten to the mounting bracket (10).
Fasten the clutch hydraulic system oil pipes, by
fitting the clamps (8) and (12) and tightening
the screws (9).
Fasten the mounting bracket for the clutch
hydraulic system oil pipes (6), tightening the
screws (7).
E3.12).
Fasten the power steering system pipes, closing
the plastic clamps (4).
Connect the ABS/ASR ECU connector (2),
pushing down the safety lever (3).
Advertisement
