Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Undo the nuts indicated.
Remove the connector cross member (Z).
Always replace the spherical exhaust system
clamps with new components after
loosening.
On both sides of the vehicle, loosen the spherical
clamp (3), undoing the indicated screw.
On both sides of the vehicle, separate the
exhaust extension (D) from the silencer (E).
Undo the screws indicated and move the two
front heat shields (65) and (66) upwards, so
that they do not obstruct the exhaust
extensions as they are moved backwards.
Advertisement
