Advertisement
Remove the plugs placed previously.
Insert the gear oil pipes (4) in the relative seats
on the single oil heat exchanger, after
replacing and lubricating the relative O-rings.
Apply AREXONS SYSTEM 52A43 - MEDIUM
STRENGTH THREAD LOCK on the thread of
the screws indicated.
Fasten the gear oil pipes (4) by fitting the retainer
forks (5) and tightening the indicated screws.
Tightening torque
Screw
Remove the plugs placed previously.
Insert the clutch hydraulic system pipes (3) in the
relative seats on the single oil heat
exchanger, after replacing and lubricating the
relative O-rings.
Apply AREXONS SYSTEM 52A43 - MEDIUM
STRENGTH THREAD LOCK on the thread of
the screws indicated.
Fasten the clutch hydraulic system pipes (3) by
fitting the retainer forks (5) and tightening the
indicated screws.
Tightening torque
Screw
Remove the plugs placed previously.
Fit the coolant return pipe (2) on the single oil
heat exchanger (A) and fasten by tightening
the clamp indicated by the red arrow.
Tightening torque
Screw collar
Nm
Class
8 Nm
B
Nm
Class
8 Nm
B
Nm
Class
4 Nm
B
Advertisement
