Advertisement
A3.36
Replacing the transparent film on Tonneau Cover
Replacing the transparent film on Tonneau Cover
This procedure is necessary only in the event of evident wear or damage (the following photo shows
wear on the LH side of the Tonneau Cover as an example) noted exclusively during normal
scheduled maintenance.
The following procedure is for replacing the adhesive transparent film (shown in following figure) applied to
protect the Tonneau Cover paintwork in the contact area with the Rear Roof shell seal.
The image aside shows evident wear on the left-
hand side of the Tonneau Cover as an
example.
The image aside shows the film package and the
film, which must be laid out flat for application.
Advertisement
