Ferrari California Workshop Manual page 932

Hide thumbs Also See for California:

Tightening torque

Fastening rear bench - bodyshell

Fit the bench (C) in the relative seat, inserting

the luggage retainer straps through the slots.

Press the lower parts of the rear seats (C) at the

points corresponding to the fasteners on the

bodyshell to fasten into the respective

Take particular care not to damage the trim

retainers on the bodyshell.

Tighten the two centre screws indicated

fastening the bench (C).

Note that the photo shows the vehicle with the

luggage compartment trim panels removed.

However, removal of these components is

not necessary.

Tightening torque

Tighten the left hand lateral screw fastening the

Tightening torque