Advertisement
Check the alignment of the exhaust system (
If the measurements comply with the values indicated
If one or more of the measurements do not comply with the values indicated
In the event of misalignment of the catalytic converters along the "Z" axis, open an ROL, requesting authorisation to
replace the catalytic converter.
In the event of misalignment along the "X" axis, proceed as described below.
On both exhaust silencers, tighten the spherical clamp by
tightening the indicated screw.
Tightening torque
Spherical clamp
B7.01).
UP TO Assembly No. 103178 (consult the Spare Parts Catalogue
to identify vehicles not affected by modification)
Fit both vibration dampers (3) on the central silencer and tighten
the indicated nuts.
Tightening torque
Nut
Check the tension of the exhaust system vibration
dampers (
FROM Assembly No. 103179 (consult the Spare Parts Catalogue
to identify vehicles not affected by modification)
Fit both vibration dampers (3) on the central silencer and tighten
the indicated nuts.
Tightening torque
Nut
Check the tension of the exhaust system vibration
dampers (
Nm
35 Nm
Nm
25 Nm
B7.01).
Nm
25 Nm
B7.01).
Class
B
Class
B
Class
B
Advertisement
