Advertisement
Removing the front engine cover
Remove the complete engine (
Remove the intake manifold (
Remove the cylinder head covers (
Remove the water pump drive belt (
Remove the A.C. compressor - power steering pump - alternator drive belt (
Right-hand side
Left-hand side
Right-hand side
B2.01).
B4.04).
B2.03).
A3.12).
Release the ground cable (8) by undoing the
indicated screw.
Move the injection cable (7) away from the
cylinder head cover, detaching in the
positions indicated by the red arrows.
Undo all the screws indicated.
Retrieve the clamp (14) complete with cable.
Take care not to damage or scratch the
cylinder head cover.
Remove the cylinder head cover (12) from its
relative seat.
Undo all the screws indicated.
Take care not to damage or scratch the
cylinder head cover.
Remove the cylinder head cover (11) from its
relative seat.
A3.12).
Advertisement
