Advertisement
Remove the lower rear suspension arm from its relevant seat.
Refitting the rear suspension lower arm
Tightening torque
Fastening spherical tie-rod - lower arm
Fastening lower arm to chassis
Fastening lower rear arm to rear hub carrier
Fastening shock absorber to lower arm
The replacement arm is supplied complete with Flanbloc.
The following procedure is for refitting the right hand rear suspension lower arm.
The procedure for refitting the left hand rear suspension lower arm is the same.
Support the weight of the rear suspension adequately.
Check again that the yellow reference markings
are correctly aligned: the markings on the
stud bolts and the markings on the Flanbloc
eyebolts must be aligned.
Spherical tie-rod
Nut (pretightening)
Nut
Nut
Nut
Nm
Class
50 Nm
B
25 Nm
A
60 Nm
A
205 Nm
A
80 Nm
A
Advertisement
