Advertisement
D3.03
Brake discs
Removing the brake discs
Remove the wheels (
Remove the rear brake callipers (
DO NOT disconnect the calliper fluid pipe and take particular care not to damage the pipe when
handling the calliper.
Remove the front brake calliper (
Refitting the brake discs
Tightening torque
Brake disc - bearing
Brake disc - bearing
Check that the disc is in proper working condition and inspect the disc contact surface, even if new.
If any dirt, stains or greasy/oily patches are noted on the disc surface, clean thoroughly with a regular
solvent, degreaser and/or soap and water.
D2.01).
D3.05).
D3.05).
Undo the wheel locator pin (2).
Undo the fastener screw (3).
Remove the disc, easing it off the wheel bearing.
Screw
Pin
Nm
Class
15.5 Nm
B
15.5 Nm
B
Advertisement
