Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Detach the tie-rod (1) for the NRRPS motion
sensor from the lower arm.
Disconnect the connector (2) for the brake pad
wear sensor.
Disconnect the connector (3) for the ABS sensor.
Detach the cable grommet (4) from the relevant
mounting bracket.
Cut the cable tie (5) for retaining cables.
Remove and retrieve the clip (9) fastening the
union for the brake fluid hose (11) onto the
relevant mounting bracket.
Undo the brake fluid hose union (10).
Extract the brake fluid hose (11) from the
relevant mounting bracket.
Undo the six screws (12) fastening the axle shaft
(A) to the differential flange and retrieve the
three spacers (13).
Disconnect the connector (14) from the shock
absorber (B).
Magnetorheological shock absorbers (optional)
only.
Support the weight of the complete suspension
adequately.
Undo the indicated screws fastening the shock
absorber (B) to the chassis.
Advertisement
