Advertisement
Undo the two central screws indicated fastening
the rear seats (C).
Note that the photo shows the vehicle with the
luggage compartment trim panels removed.
However, removal of these components is
not necessary.
UP TO Assembly No. 103178 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Press the lower parts of the rear seats (C) at the
points corresponding to the fasteners on the
bodyshell to detach from the respective
retainers.
Take particular care not to damage the trim
retainers on the bodyshell.
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Remove the rear seat cushions, which are held
in place with Velcro.
Undo the indicated nuts on the rear seats (C).
Advertisement
