Advertisement
DO NOT warm the film before removal.
The film must be replaced with the vehicle bodywork at the normal ambient temperature inside the
workshop.
If the bodywork is excessively warm, adhesive will be transferred from the film to the Tonneau Cover
paintwork.
With the vehicle in "Cabrio" configuration, clean the Tonneau Cover thoroughly with a new microfibre cloth
and water based detergent.
Specific tools and materials needed for the
procedure:
This film must be applied with a semi-soft rubber
or silicone spatula with no sharp corners,
measuring no larger than the dimensions
given in the image aside. Purchase this
spatula locally.
The white arrows indicate the rounded sides.
New microfibre cloths.
ISOPROPYL alcohol.
Water based detergent.
Open the luggage compartment lid.
To ensure that the film detaches evenly, lift the
film by hand along the entire outer edge.
Working with due caution and starting from one
edge, detach the film slowly, ensuring that no
glue residue is left on the paintwork.
Advertisement
