Advertisement
Refit the steering box (
D5.04).
Apply a uniform layer of grease DuPont
Lubricants Krytox® 205 GPL Standard
Grade Grease on the surfaces of shoulder
bushings in contact with the rubber bushes.
Apply 1 ml of grease MOLYKOTE PG21
uniformly over the entire inner surfaces of the
rubber bushes.
FROM Assembly No. 94496, apply 1 ml of
grease DuPont Lubricants Krytox® 205
GPL Standard Grade Grease uniformly over
the inner surfaces of the rubber bushes.
Pressing into place by hand, fit the rubber
bushes (3) on the stabiliser bar in the same
position and orientation noted during
disassembly.
Using a cloth moistened with heptane,
thoroughly clean and degrease the outer
surface of the rubber bush and the inner
surface of the bracket on the chassis.
Fit the stabiliser bar (A) complete with rubber
bushes as originally mounted in its seat in the
engine subframe, passing through the hole in
the casting.
Advertisement
