Advertisement
D4.04
Shock absorbers
The vehicle may be equipped with fixed setting shock absorbers (2) or variable setting magnetorheological
shock absorbers (1) (optional), already present on the 599 GTB Fiorano.
The end of travel of the compression stroke is damped by a rubber bushing fitted coaxially with the stem; the
end of travel of the rebound stroke is damped by a rubber bushing installed inside the shock absorber.
A - Retainer washer
B - Bushing for shock absorber
C - Upper spring spacer
D - Spring mounting ring nut
E - Shock absorber
F - Spring
G - Lower spacer
Removing the front shock absorbers
The following procedure is for removing the right hand front shock absorber.
The procedure for removing the left hand front shock absorber is the same.
For magnetorheological shock absorbers only (optional). Remove the engine compartment cosmetic
shields (
E3.13).
Advertisement
