Advertisement
FROM Assembly No. 103179 (consult the Spare Parts Catalogue to identify vehicles not affected by
modification)
ALWAYS REPLACE the O-ring whenever the fuel pump filter is removed.
Clean all removed components thoroughly and dry with compressed air.
Fit the safety clip (10) into its seat on the fuel
pump filter ring nut, ensuring that it is
securely fastened.
Connect the pipe (5), fastening the respective
union.
Connect the ground cable (4), fitting the seal
washer and tightening the indicated screw.
Connect the connector (3).
Fit the cap (2).
Fit the cap (1).
Advertisement
