Advertisement
Removing the rear stabiliser bar
Located behind the gearbox.
Remove the rear flat undertray diffuser (
Remove the wheels (
Remove both rear ones.
Remove the rear wheelhouses (
Remove both rear elements.
ONLY for vehicles WITH single oil heat exchanger. Remove the rear bumper (
ONLY for vehicles WITH single oil heat exchanger. Remove the silencer (
Remove both silencers.
E3.12).
D2.01).
E3.05).
ONLY for vehicles WITHOUT single oil heat
exchanger
Remove the cross piece (1) connecting the
silencers, by undoing the screws indicated.
Always replace the spherical exhaust system
clamps with new components after
loosening.
Loosen the spherical clamps (2) and move the
exhaust extensions (7) as far away as
possible from the silencers (6).
Undo the nut (3) fastening the rear stabiliser bar
(A) to the tie-rod of the left hand suspension.
Repeat the procedure on the left hand
suspension.
E3.04).
B7.06).
Advertisement
