Advertisement
Disconnect the battery (
Remove the wheels (
Remove the right hand rear wheel.
Refit the wheels (
Connect the battery (
F2.01).
D2.01).
D2.01).
F2.01).
Disconnect the connector (1).
Detach the tie-rod (2) from the lower arm.
Undo the two screws indicated fastening the
mounting bracket for the right hand rear
NRRPS motion sensor (A).
Remove the right hand rear NRRPS motion
sensor (A), complete with relative mounting
bracket, and replace.
Fit the new right hand rear NRRPS motion
sensor (A) in its seat, complete with relative
mounting bracket.
Tighten the two screws indicated fastening the
mounting bracket for the right hand rear
NRRPS motion sensor (A).
Tightening torque
Screw
Nm
Class
5 Nm
B
Advertisement
