Ferrari California Workshop Manual page 712

Replacing rear stabiliser bar tie-rods
Tightening torque
Fastening spherical tie-rod - lower arm
Fastening front stabiliser bar - spherical tie-rod
Spherical tie-rod
Nut
Undo the nut (1).
Undo the pin (2).
Remove the spherical tie-rod (A) and replace it.
Fit the new tie-rod (A).
Tighten the pin (2).
Tightening torque
Spherical tie-rod
Tighten the nut (1).
Tightening torque
Nut
Nm Class
50 Nm B
50 Nm B
Nm Class
50 Nm
Nm Class
50 Nm
B
B