Advertisement
Check the Shell Transaxle 75W-90 GL5 gear oil level (
Check that there is no leakage from the drain plugs.
Checking the gear oil level with mechanical gearbox
Tightening torque
Fastening oil level inspection cap for mechanical
gearbox
The following instructions must be carried out precisely to ensure correct lubrication of the gears.
Remove the rear flat undertray section (
CONDITIONS FOR CHECKING LEVEL CORRECTLY:
To check the gear oil level correctly, carry out the following procedures precisely as described.
1) The vehicle must be on the vehicle lift with the engine running at idle speed and the wheels free to
rotate.
2) Select 6th gear with the engine at 1000 rpm.
3) Maintain these conditions 2 for 2 to 3 minutes.
4) Turn engine off.
A3.02).
Plug
E3.12).
Remove the shield (1) fastening the EPB cable
(2), undoing the indicated screws.
Remove the mounting bracket (3), undoing the
indicated screws.
Nm
Class
49 Nm
B
Advertisement
